7 kg ingots
Intended for part casting, delivered in packages of approximately 500 kg, properly strapped.
Since 1992 · Venado Tuerto, Argentina
Aluminum
and zinc alloys
We refine and process non-ferrous metals into alloys with certified chemical composition. 2,500 metric tons monthly capacity, continuous production and in-house logistics.
2,500MT/month
Installed capacity
1992
Founded
100%
Certified composition
24/7
Continuous production
Products
We produce alloys in different formats
The different formats we offer are defined according to the specifications requested by each of our clients.
Shot pellets
Intended for the steel industry. Delivered in big bags of approximately 1200 kg.
Half spheres
Intended for the steel industry. Delivered in big bags of approximately 1200 kg.
Jumbo ingots
Intended for galvanizing and Galvalume processes, delivered as a single piece of approximately 1000 kg.
Liquid aluminum
Supplied to our main client, Essen Aluminio S.A., for the manufacturing of their cookware. Delivered via thermal ladles every 45 minutes.
Alloys
Certified chemical composition
We produce aluminum and zinc alloys, each one with its standard and chemical composition guaranteed in every cast.
Need a specific alloy? Get in touch.
Low Pressure
2 alloysAlloys for low-pressure die casting, with excellent castability and mechanical strength.
| SCM Alloy Designation | Equivalences / Standards | Chemical composition (%) | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| SI | FE | CU | MN | MG | ZN | TI | CR | NI | PB | SN | AL | ||
| SCM 12 | AL SI 12 | 9,50 - 12,00 | 0,150 | 0,030 | 0,100 | 0,10 - 0,20 | 0,070 | 0,03 - 0,15 | — | — | — | — | RESTO |
| SCM 356 | AL SI 7 | 6,50 - 7,50 | 0,150 | 0,100 | 0,100 | 0,27 - 0,45 | 0,100 | 0,200 | — | — | — | — | RESTO |
SCM 12
AL SI 12
Chemical composition (%)
SI
9,50 - 12,00
FE
0,150
CU
0,030
MN
0,100
MG
0,10 - 0,20
ZN
0,070
TI
0,03 - 0,15
AL
RESTO
SCM 356
AL SI 7
Chemical composition (%)
SI
6,50 - 7,50
FE
0,150
CU
0,100
MN
0,100
MG
0,27 - 0,45
ZN
0,100
TI
0,200
AL
RESTO
Gravity
7 alloysAlloys for gravity casting in sand and permanent molds, ideal for structural parts.
| SCM Alloy Designation | Equivalences / Standards | Chemical composition (%) | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| SI | FE | CU | MN | MG | ZN | TI | CR | NI | PB | SN | AL | ||
| SCM 55 | IRAM 444.1 / AL SI 6 | 5,50 - 6,50 | 0,500 | 0,100 | 0,100 | 0,100 | 0,050 | 0,200 | 0,030 | 0,030 | 0,010 | 0,010 | RESTO |
| SCM 13 | IRAM B413.1 / AB 44200 | 11,00 - 13,00 | 0,600 | 0,500 | 0,500 | 0,300 | 0,500 | — | — | — | — | — | RESTO |
| SCM 73 | AS 73 / AB 46300 | 6,50 - 8,00 | 0,800 | 3,00 - 4,00 | 0,20 - 0,50 | 0,30 - 0,60 | 0,800 | 0,250 | — | 0,300 | 0,150 | 0,100 | RESTO |
| SCM 94 | IRAM A.360.2 / AC 44400 | 9,00 - 11,00 | 0,650 | 0,350 | 0,550 | 0,20 - 0,45 | 0,350 | 0,200 | — | 0,150 | — | — | RESTO |
| SCM 2520 | EN AC 44100 / DIM GD-AL SI 12 | 11,00 - 13,50 | 0,300 | 0,050 | 0,200 | 0,030 | 0,050 | 0,100 | — | 0,030 | 0,030 | 0,030 | RESTO |
| SCM 4253 | 9,00 - 11,00 | 0,300 | 0,05 - 0,10 | 0,500 | 0,30 - 0,40 | 0,300 | 0,150 | — | 0,050 | 0,050 | 0,050 | RESTO | |
| SCM 357 | IRAM 356.1 | 6,50 - 7,50 | 0,550 | 0,250 | 0,350 | 0,20 - 0,45 | 0,350 | 0,200 | — | 0,100 | — | — | RESTO |
SCM 55
IRAM 444.1 / AL SI 6
Chemical composition (%)
SI
5,50 - 6,50
FE
0,500
CU
0,100
MN
0,100
MG
0,100
ZN
0,050
TI
0,200
CR
0,030
NI
0,030
PB
0,010
SN
0,010
AL
RESTO
SCM 13
IRAM B413.1 / AB 44200
Chemical composition (%)
SI
11,00 - 13,00
FE
0,600
CU
0,500
MN
0,500
MG
0,300
ZN
0,500
AL
RESTO
SCM 73
AS 73 / AB 46300
Chemical composition (%)
SI
6,50 - 8,00
FE
0,800
CU
3,00 - 4,00
MN
0,20 - 0,50
MG
0,30 - 0,60
ZN
0,800
TI
0,250
NI
0,300
PB
0,150
SN
0,100
AL
RESTO
SCM 94
IRAM A.360.2 / AC 44400
Chemical composition (%)
SI
9,00 - 11,00
FE
0,650
CU
0,350
MN
0,550
MG
0,20 - 0,45
ZN
0,350
TI
0,200
NI
0,150
AL
RESTO
SCM 2520
EN AC 44100 / DIM GD-AL SI 12
Chemical composition (%)
SI
11,00 - 13,50
FE
0,300
CU
0,050
MN
0,200
MG
0,030
ZN
0,050
TI
0,100
NI
0,030
PB
0,030
SN
0,030
AL
RESTO
SCM 4253
Chemical composition (%)
SI
9,00 - 11,00
FE
0,300
CU
0,05 - 0,10
MN
0,500
MG
0,30 - 0,40
ZN
0,300
TI
0,150
NI
0,050
PB
0,050
SN
0,050
AL
RESTO
SCM 357
IRAM 356.1
Chemical composition (%)
SI
6,50 - 7,50
FE
0,550
CU
0,250
MN
0,350
MG
0,20 - 0,45
ZN
0,350
TI
0,200
NI
0,100
AL
RESTO
High Pressure
6 alloysAlloys for high-pressure die casting (HPDC) with fluidity and strength for series production.
| SCM Alloy Designation | Equivalences / Standards | Chemical composition (%) | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| SI | FE | CU | MN | MG | ZN | TI | CR | NI | PB | SN | AL | ||
| SCM 84 | UNI 3106 / SAE 306 | 7,50 - 9,50 | 0,60 - 1,20 | 3,00 - 4,00 | 0,500 | 0,10 - 0,50 | 1,500 | 0,100 | — | — | 0,250 | 0,100 | RESTO |
| SCM 121 | ADC 12 | 10,00 - 12,00 | 0,75 - 1,00 | 2,00 - 3,50 | 0,500 | 0,10 - 0,30 | 1,000 | 0,200 | — | 0,300 | 0,200 | 0,200 | RESTO |
| SCM 132 | AL SI 132 | 11,00 - 12,50 | 0,70 - 1,00 | 1,75 - 2,50 | 0,500 | 0,300 | 1,400 | 0,200 | — | 0,300 | 0,200 | 0,100 | RESTO |
| SCM 138 | IRAM A 413.1 / AL SI 138 | 11,00 - 13,00 | 1,000 | 1,000 | 0,350 | 0,350 | 1,000 | 0,150 | 0,050 | 0,500 | 0,200 | 0,200 | RESTO |
| SCM 380 | IRAM A380.1 / SAE 306 | 7,50 - 9,50 | 0,70 - 1,30 | 3,00 - 4,00 | 0,500 | 0,300 | 3,000 | — | — | 0,100 | 0,500 | 0,200 | RESTO |
| SCM 853 | AS 853 / AC 46000 | 8,00 - 9,50 | 0,90 - 1,10 | 3,00 - 4,00 | 0,500 | 0,300 | 1,00 - 1,20 | 0,200 | 0,040 | 0,300 | 0,150 | 0,100 | RESTO |
SCM 84
UNI 3106 / SAE 306
Chemical composition (%)
SI
7,50 - 9,50
FE
0,60 - 1,20
CU
3,00 - 4,00
MN
0,500
MG
0,10 - 0,50
ZN
1,500
TI
0,100
PB
0,250
SN
0,100
AL
RESTO
SCM 121
ADC 12
Chemical composition (%)
SI
10,00 - 12,00
FE
0,75 - 1,00
CU
2,00 - 3,50
MN
0,500
MG
0,10 - 0,30
ZN
1,000
TI
0,200
NI
0,300
PB
0,200
SN
0,200
AL
RESTO
SCM 132
AL SI 132
Chemical composition (%)
SI
11,00 - 12,50
FE
0,70 - 1,00
CU
1,75 - 2,50
MN
0,500
MG
0,300
ZN
1,400
TI
0,200
NI
0,300
PB
0,200
SN
0,100
AL
RESTO
SCM 138
IRAM A 413.1 / AL SI 138
Chemical composition (%)
SI
11,00 - 13,00
FE
1,000
CU
1,000
MN
0,350
MG
0,350
ZN
1,000
TI
0,150
CR
0,050
NI
0,500
PB
0,200
SN
0,200
AL
RESTO
SCM 380
IRAM A380.1 / SAE 306
Chemical composition (%)
SI
7,50 - 9,50
FE
0,70 - 1,30
CU
3,00 - 4,00
MN
0,500
MG
0,300
ZN
3,000
NI
0,100
PB
0,500
SN
0,200
AL
RESTO
SCM 853
AS 853 / AC 46000
Chemical composition (%)
SI
8,00 - 9,50
FE
0,90 - 1,10
CU
3,00 - 4,00
MN
0,500
MG
0,300
ZN
1,00 - 1,20
TI
0,200
CR
0,040
NI
0,300
PB
0,150
SN
0,100
AL
RESTO
Rolling
2 alloysAlloys for rolling and extrusion, based on high-purity aluminum.
| SCM Alloy Designation | Equivalences / Standards | Chemical composition (%) | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| SI | FE | CU | MN | MG | ZN | TI | CR | NI | PB | SN | AL | ||
| SCM 6063 | 6063 / ASTM B210 | 0,490 | 0,10 - 0,40 | 0,100 | 0,100 | 0,500 | 0,050 | 0,050 | 0,050 | 0,030 | 0,050 | — | RESTO |
| SCM 8011 | AW 8011 | 0,50 - 0,95 | 0,60 - 1,00 | 0,100 | 0,100 | 0,050 | 0,050 | 0,050 | 0,050 | — | 0,010 | 0,020 | RESTO |
SCM 6063
6063 / ASTM B210
Chemical composition (%)
SI
0,490
FE
0,10 - 0,40
CU
0,100
MN
0,100
MG
0,500
ZN
0,050
TI
0,050
CR
0,050
NI
0,030
PB
0,050
AL
RESTO
SCM 8011
AW 8011
Chemical composition (%)
SI
0,50 - 0,95
FE
0,60 - 1,00
CU
0,100
MN
0,100
MG
0,050
ZN
0,050
TI
0,050
CR
0,050
PB
0,010
SN
0,020
AL
RESTO
Piston
3 alloysHigh-silicon alloys for internal combustion engine pistons.
| SCM Alloy Designation | Equivalences / Standards | Chemical composition (%) | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| SI | FE | CU | MN | MG | ZN | TI | CR | NI | PB | SN | AL | ||
| SCM S2N | ASTM B210 | 11,40 - 12,40 | 0,400 | 3,10 - 3,50 | 0,150 | 0,60 - 1,00 | 0,100 | 0,050 | 0,030 | 2,10 - 2,50 | 0,500 | 0,040 | RESTO |
| SCM 130 | MAHLE 124 / AB 48000 | 11,50 - 12,50 | 0,500 | 0,80 - 1,50 | 0,150 | 0,90 - 1,30 | 0,150 | 0,150 | — | 0,80 - 1,30 | — | — | RESTO |
| SCM 139 | AL SI16 CU2 MGNI / P16 | 16,00 - 17,00 | 0,500 | 1,80 - 2,30 | 0,200 | 0,90 - 1,30 | 0,200 | 0,200 | — | 0,80 - 1,30 | 0,050 | 0,050 | RESTO |
SCM S2N
ASTM B210
Chemical composition (%)
SI
11,40 - 12,40
FE
0,400
CU
3,10 - 3,50
MN
0,150
MG
0,60 - 1,00
ZN
0,100
TI
0,050
CR
0,030
NI
2,10 - 2,50
PB
0,500
SN
0,040
AL
RESTO
SCM 130
MAHLE 124 / AB 48000
Chemical composition (%)
SI
11,50 - 12,50
FE
0,500
CU
0,80 - 1,50
MN
0,150
MG
0,90 - 1,30
ZN
0,150
TI
0,150
NI
0,80 - 1,30
AL
RESTO
SCM 139
AL SI16 CU2 MGNI / P16
Chemical composition (%)
SI
16,00 - 17,00
FE
0,500
CU
1,80 - 2,30
MN
0,200
MG
0,90 - 1,30
ZN
0,200
TI
0,200
NI
0,80 - 1,30
PB
0,050
SN
0,050
AL
RESTO
Steel Mill Deoxidizers
2 alloysDeoxidizing aluminum for steel casting. High purity and accuracy in Al content.
| SCM Alloy Designation | Equivalences / Standards | Chemical composition (%) | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| SI | FE | CU | MN | MG | ZN | TI | CR | NI | PB | SN | AL | ||
| DESOX.92% | ASTM B37-96 | 3,000 | — | 2,500 | — | — | 2,500 | — | — | — | — | — | 92,00 |
| DESOX.95% | ASTM B37-96 | 2,000 | — | 1,000 | 0,500 | 1,000 | 1,000 | — | — | — | — | — | 95,00 |
DESOX.92%
ASTM B37-96
Chemical composition (%)
SI
3,000
CU
2,500
ZN
2,500
AL
92,00
DESOX.95%
ASTM B37-96
Chemical composition (%)
SI
2,000
CU
1,000
MN
0,500
MG
1,000
ZN
1,000
AL
95,00
Galvanizing
1 alloyZinc alloy for hot-dip galvanizing processes.
| SCM Alloy Designation | Chemical composition (%) | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| SI | FE | CU | MN | MG | ZN | TI | CR | NI | PB | SN | AL | |
| SCM Z47N | 0,025 | 0,006 | 0,003 | — | — | 2,500 | — | — | — | 0,004 | — | 0,48 - 0,52 |
SCM Z47N
Chemical composition (%)
SI
0,025
FE
0,006
CU
0,003
ZN
2,500
PB
0,004
AL
0,48 - 0,52
Galvalume
1 alloyZn-Al alloy for Galvalume coating on steel sheet.
| SCM Alloy Designation | Chemical composition (%) | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| SI | FE | CU | MN | MG | ZN | TI | CR | NI | PB | SN | AL | |
| SCM ASR55 | 1,20 - 1,50 | 0,100 | 0,030 | — | 0,002 | 41,70 - 45,70 | 0,003 | — | — | 0,010 | — | 52,70 - 57,10 |
SCM ASR55
Chemical composition (%)
SI
1,20 - 1,50
FE
0,100
CU
0,030
MG
0,002
ZN
41,70 - 45,70
TI
0,003
PB
0,010
AL
52,70 - 57,10
Clients
They choose us
Craft
The metal that powers the industry.
Since 1992, every cast carries three decades of precision.
Company
Industrial plant
Scale and control in every cast
Our plant in the La Victoria Industrial Park in Venado Tuerto operates continuously, ensuring response capacity for industrial volumes without compromising the quality of each cast.
- High-capacity melting furnaces
- In-house optical emission spectrometer
- Composition control in every cast
- Internal metallurgical laboratory
- Own logistics, deliveries nationwide
- Export capability
Process
01
Selection
Raw material classified and analyzed before entering the furnace.
02
Melting
High-capacity furnaces with precise temperature control.
03
Control
Spectrometric analysis of every cast.
04
Delivery
Ingots with batch and quality certificate.
Plant 1 — Foundry
Melting furnaces, casting of aluminum and zinc alloys, spectrometric control and ingot pallet assembly.
Plant 2 — Raw materials
Reception, classification and preparation of non-ferrous scrap before entering the foundry.
Work with us
Join the Sicamar team
Connect directly with our Human Resources team here. We are always looking for technical and operational talent to grow together.
Get in touchContact
Request your quote
Tell us which alloy you need, in what volume and format. Our commercial team will respond with technical data sheet, availability and terms.
Email
scm@sicamar.com.arPhone
03462-431142 / 43WhatsApp
3462 15523886Plant
La Victoria Industrial Park, Venado Tuerto, Santa Fe, ArgentinaNeed a quote?
Write to us with the details of your requirement and we will respond promptly.